GLOCKMEISTER
PRESENTS

STOCK COIL TRIGGER SPRING
AND NEW YORK TRIGGER SPRING
INSTALLATION.

 
 

Figure 1.
Above is the stock coil trigger spring installed correctly (Figure 1.).

Figure 2.

Before installing the New York Trigger Spring, be sure that the connector fits tightly in the Trigger Mechanism Housing. If the Connector does not fit tightly - you will need to replace the Trigger Mechanism Housing to ensure a tight fit for the connector.

There are two New York Trigger Springs the Olive (about 8 pounds) and the Orange (about 11 pounds). Either spring should only be installed with the 3.5 pound Connector or the 5 pound Connector. DO NOT USE EITHER OF THE NY TRIGGER SPRINGS WITH THE 8 POUND CONNECTOR